KIT ALERT!!

Presents

TIE Scimitar Bomber

*E-Mail Address: darkmatter@bell.net

To contact the KIT PRODUCER direct, please click the CONTACT KIT PRODUCER link below.

1/144 Scale Tie Scimitar Master by Al Wong

Man, oh man, it was a great day for me; Along with the A-wing and the Hulk Figure, I also received the 1/144 Scimitar. What can I say? It’s another beautiful creation from Alfred’s mind. I love it; I can’t wait to build it and I know you guys will love it too.

To start with, upon ripping into your package, you will be greeted with six well-cast yellow resin pieces.

You will receive:

1x: main hull part

2x: wings

2x: bomb rails

1x: rear-end piece

First off, the biggest of the six pieces: the main hull. It measures in at 3.5905″ in length so it’s a rather small kit, but so much detail is packed into it. Where to begin? Looking over this beautifully-cast piece, I see on the top of it the epitomy of Star Wars signature “guts on the outside”...

So guys, I recently received this beautiful kit in the mail, thanks to Mister Wong as a preview. I received it a few weeks ago, but due to family issues, I’m just now getting around to typing this review, and I must say, he did a very nice job capturing the essence of the concept that this kit is based upon.

To start, when you open your box, you’ll be greeted with ten beautifully-cast pieces of resin (cast by Ed Holt, or, as some know him, MonkeyWorks) and one vacu-formed part.

You will recieve:

1x: Main body

1x: Vacu formed Canopy

1x: Pilot

1x: INstroment panel

1x: Rear Plate

2x: Blasters / guns

2x: Engine exausts

and finally 2x Aileron Type Thrust vectoring fins.

It is pertinent to know at this time that when I first received this kit, I made Al and Ed aware that there was an issue with...

Today we have Al Wongs 1/48 scale Peacekeeper Prowler of Farscape fame.  What can I say to start this one off …other then WOW! I popped this box open, at the time not very familiar with the vessel in question as I never really got into Farscape, so I Goggled some and watched some on Netflix just to get a feel for the craft. And I have to say it’s a very good representation from the subject in question.

Before I even started looking for reference though, I was astounded with the sheer number of parts in this kit. We are all used to your average resin kit, something on the order of 6-15 parts, this one on the other hand has 37 well cast yellow resin parts to it with some extras for detailing. Casting, once again, is done by Ed Holt of Monkey works and R2 Re-release Kbop fame.

You will re...

Originally started by artist R.L. Bleecker, then transferred to artist Marc Elkins, this piece ended up breaking apart during transport and has to be completely re-done by Marc to be this fantastic piece you see here today. Sadly, the only part of the now retired R.L. Bleecker’s work that survived were the blue/grey stripes…which Marc was able to keep on it. This piece is absolutely amazing! Marc has outdone himself yet again with turning a model into something that very well could have been a fill sized piece, shrunk down! The detail and weathering are fantastic! I love how Marc made it look as if the paint was worn down to the metal in several places on this build...

KIT ALERT!!

Presents

First Men In The Moon U.N.1 Lunar Module

*E-Mail Address:cl2012@yahoo.com         

I have the great pleasure of introducing another fine artist to this Gallery…. John John Jesse! Built up from the Alfred Wong kit, John John did a fantastic job recreating the TIE Interceptor’s aggressive look with his paint and weathering technique. I am looking forward to showing more of this artists works in the near future.

To contact artist John John Jesse direct, please click HERE!

To visit his site, please click on his banner link below…

Read More