SOLD!

STAR WARS

Studio Scale Y-WING

by

Jason Eaton

$3,000 U.S.

Plus Shipping

Y wing was built from a set of cast parts that were from a run of prototypes produced by Master Replicas in 2005 (I worked on the project)

It’s a hybrid model, combining all the things I liked about the various Y-Wings…

Unique features:

• Two steady-on and two fflickering LEDs in EACH of the engines
• Custom designed programmed board to drive the light features
• All solder points securely sealed with heat-shrink tubing to prevent shorting any lights.
• Fiber optics, plastic lenses, and photo etch in the cockpit
• Fiber optic “light pipe” fed by a green and blue led in the Artoo unit that switches between the colors
• Fiber optic “light pipe” fed by a red and yellow led in the Artoo unit that switches between the colors
• F...

We all know not very many of these 31 inch Vipers exist. Formerly a kit offered by MSLZ22 Models, famed artist Jason Eaton has now sold his fantastic build to Collector Hector Rosales! As you can see… the smile of Hectors face tells it all! This piece is beautiful, from the main kit, to the fantastic custom electronic additions and finish by Jason. Simply fantastic! To view more on this piece, click HERE! Congratulations to Hector for his excellent collection addition!

Jason Eaton

Jason Eaton is a model builder who has spent the past fourteen years working with Star Wars license holders including Master Replicas...

SOLD!!

BATTLESTAR GALACTICA

COLONIAL VIPER

$2,500 U.S.

Plus Custom Crating and Freight Shipping.

31 inches HUGE at 1:12 Scale!!

Built by famed Artist

JASON EATON!!

Sitting at approximately 20 pounds, this was built with a metal armature, sturdy resin and epoxy construction!

Fantastic artist John John Jesse keeps coming forward with amazing builds to show! This one of the NICE-N Model Designs Studio Scale Y-Wing (of the now retired original cast kit). After receiving the kit, and built guns from artist Jason Eaton, John John built and finished this piece the way he new it should be…. purely REBEL…. with all it’s well used panels and battle damage! It is beautiful!

To visit John John Jesse’s site direct, please click the banner link above.

To contact John John Jesse direct, please click the CONTACT ARTIST link below.

John John Jesse

*****************************

*****************************

Statements made, or views expressed may NOT be the views of Modeler’s Miniatures & Magic

Pricing and Availability are subject to change by the Kit Maker/...

Another fantastic Ma.K. build by industry famed artist Jason Eaton. Jason’s attention to fine details of these pieces is amazing! I would very much like to show more in this category. Fantastic work by Jason!

Here is what Jason has to say of this build…

This is the 1/20th scale Rainbow Egg kit of the Tornado, Designed by Kow Yokoyama, as seen in the mid 1980s in SF3D articles published by Hobby Japan. Made from resin, wires, and tubing, the Tornado is a funky design, not often seen in Maschinen Krieger collections. This was a lot of fun to make, as I modified it to be a “Winter version” of the Tornado!

Instead of the original gun, I have placed two missile tubes on the chassis, and added a “bump out” behind the pilot’s seat...

Built for a client back in 2010 to resemble the actual stop motion filming model used in Star Wars – The Empire Strikes Back, famed artist Jason Eaton again shows us a build that truly lets one know why he is one of the world’s finest model artists today. This piece is fantastic from it’s positioning… to it’s perfectly weathered paint job! A beautiful replica!

Here is what Jason has to say of this piece…

This is a pretty dang accurate recreation I made of the stop-motion AT-ST from The Empire Strikes Back for a client in 2010. This model, as it exists today, is stripped down to almost nothing – the remnants of the details on the head, the metal armature, and the remnants of the feet...

I thought the first Cylon Raider was fantastic that was designed for the 2003 series Battlestar Galactica, but then a few seasons later they made an “Advanced” Raider…. and it is even more sleek and aggressive looking than it’s predecessor!  Showing his build of that fighter today is world class modeler Jason Eaton. And he did this piece exactly the usual world class justice that he normally shows in his amazing builds. Beautiful!

This is what Jason has to say of this piece…

This is the gorgeous 1:24 Advanced Cylon Raider from Battlestar Galactica, which was offered by Bad Azz Models. This model has been made in the same scale as the original series’ Viper model, so people have agreed that the new series models made in 1:24th scale can be referred to as “Studio Scale”...

This is a subject we are going to be showing MUCH more on…. Maschinen Krieger modeling! One of the best artists in this category is Jason Eaton. His work absolutely captures the essence of the entire category! It is unique and believable down to the last rivet and bolt Jason places on his builds! They are that detailed! As is usual… beautiful work from this famed artist! We are greatly honored to be able to show his works here on Modeler Magic.

This is what artist Jason Eaton has to say of this great build…

This is the 1/20th scale Rainbow Egg kit of the Tornado, Designed by Kow Yokoyama, as seen in the mid 1980s in SF3D articles published by Hobby Japan. Made from resin, wires, and tubing, the Tornado is a funky design, not often seen in Maschinen Krieger collections...

Once again we are able to show the great talent this artist produces with his build of the kit (mastered by Richard Long) of the McQuarrie Concept X-Wing! Professional artist Jason Eaton never disappoints with his ‘true to life’ build expressionism. Every piece on this build is beautifully done, and the final paint scheme extremely unique! Truly a masterpiece we have come to expect from this great artist.

Jason Eaton

Jason Eaton is a model builder who has spent the past fourteen years working with Star Wars license holders including Master Replicas, EFX, and Sideshow, creating paint masters and prototypes for many of the studio scale and scaled props, ships, and characters seen in the Star Wars films, and is honored to continue the work in this new era of Star Wars sub...

I received an email a few days ago from professional artist Jason Eaton with some fantastic news! This kit master is now completed and being sent to Mike Salzo of MSLZ22 Models to be cast and released! Jason Eaton really did a fantastic job on this amazing master! Thank you Jason! All I can say is…. COUNT ME IN FOR ONE… or TWO OF THESE!

March 1, 2011

February 18, 2011

Here is an update on this fantastic MSLZ22 Models Kit. Professional Artist Jason Eaton is doing genuis work on the patterns which look to be very close to completion!

February 4, 2011

Every Battlestar Galactica Fan of the original series remembers the episode with the Viper that had the flat wings, and no top engine… The ANTIQUE Viper! Being made for MSLZ22 Models to release as a kit in time for Wonderfest 2011, Hobby an...