Category Richard Long – Works Featured by Arists

This fantastic piece was created by master artist Andrew Creighton using the blue screen photos (SEEN HERE) of the fantastic 41 inch Nemesis 1701-E that Richard Long from Sovereign Replicas mastered for the collection. Andrew capture the lighting in this beauty shot with the Moon perfectly! An outstanding piece by professional artist Andrew Creighton!

To view this piece in it’s full size, please click on it…

To contact professional artist Andrew Creighton direct, please click on his name anywhere on this page, or on the banner below…

To contact professional modeler Richard Long direct regarding his professional services, please click on his name anywhere on this page. To visit the Sovereign Replicas site, please click on the banner below…

The Blue Screen Photos were taken with a ...

Using the photos of the fantastic Studio Scale TYDIRIUM build from the Sovereign Replicas Kit ,… Peter Noble again creates a famous scene from Star Wars – Return of the Jedi when Luke fly’s his father, Darth Vader (now Anikin again) down to the planet of Endor to his final resting place! His attention to color used to make it like the original is eye popping! A beautiful piece by professional artist Peter Noble!

To view this piece in it’s original resolution, please just click on it…

Here is another great build by professional modeler Dean Dymerski! Built from a pattern created by Sovereign Replicas, Dean turned this small beauty into something incredible from the outstanding television series Star Wars – The Clone Wars! If I didn’t know better, I would swear this model to be about two feet long! However, it is really about 7-9 inches! An outstanding build from an outstanding build artist… and pattern maker!

To contact Dean regarding his services, please click on his name here… DEAN DYMERSKI.

“We’re going in… we’re going in FULL THROTTLE! That ought to keep those fighters off our backs!” Luke Sywalker

And so they did… and so here replicated with the fantastic works from R.L. Bleecker and Richard Long. Utilizing the Blue Screen photos of each X-wing build (Red 5, Red 2, and Red 3), plus the fantastic background created by master model maker Rick Ingalsbe, I was able to make this composite.

To view this composite in it’s full resolution, please click on it…

Time is crucial for the Rebels on the moon of Yavin as the Death Star clears the planet to destroy them. Nearly the entire fighting force the Rebels have sent now destroyed, their last hope of survival remains on these three pilots… Luke, Biggs and Wedge.

Here you see Biggs’s RED 3 in the center with Luke flying on his upper starboard side in RED 5, with Wedge a bit further, and higher away to Biggs’s port side flying RED 2…. getting ready for their last trench run to destroy the massive Death Star!

“We’re going in… we’re going in full throttle! That ought to keep those fighters off our backs!”… Luke Skywalker

All three studio scale X-Wing models were from various Mike Salzo patterns and are very close to exact replicas of the A New Hope studio models used in filming.

Built from the fantastic 1:350 Sovereign Replicas kit mastered by Richard Long, professional modeler Marc Elkins made this piece into a fine miniature for any collection! His paneling and lighting really push this into the filming miniature realm… and if there were something to film of that genre currently… this would be the model to use!

For inquires about this kit,  or Richard Long’s pattern and build services, please click the banner link below…

This piece turned out so well that I decided to do a composite for it.

Utilizing the fantastic photo Richard Long showed of the kit that he produced (which is now owned by Clay Brown), I immediately had a vision in my head of the Tydirium leaving the Death Star II to go down to the planet surface. This took very little manipulating to make it look as if it were from Return of the Jedi.
Kurt Kuhn
Kuhn Global Incorporated
Modelers Miniatures & Magic

To view the composite in it’s full 1600 X 1200 resolution, just click on the picture below…

Utilizing the blue screen photos of the Salzo V2 X-wing kit build that Richard Long (of Sovereign Replicas) did for the collection as RED 3, (Biggs Darklighter’s fighter from Star Wars A New Hope), my friend Robert Watson made this piece shine with his Composite art! It should be noted that this is the first studio x-wing replica to be painted like RED 3 as it was seen in Star Wars – A new Hope.

Built from the outstanding Sovereign Replicas kit (which was made from a direct pull from the original filming model and repaired to mold), the professionals at The FX Company did a fantastic job in recreating the look of the original studio model!

To contact The FX Company for it’s services, please click their banner link below…

Another amazing piece by Robert Watson. Using the blue screen photos of the 1:350 Klingon K’Tinga that was mastered and built (for my own collection) by professional modeler and pattern maker Richard Long (of Sovereign Replicas), Robert was able to re-create the opening scene from Star Trek The Motion Picture!

For inquiries of Richard Long’s services, please click the banner link below…