Category Massimo Sora

Diamond Select DeLorean model 1:15 modified with new lights and a dedicated stand. In the stand there is a working clock, lights and a memory card with multiple songs taken from the films back to the future. There are also some dialogues from the first film (in Italian). The original functions of the model (lights and sounds and flight / road configuration) are unchanged and the model also works with batteries. The stand and the stand graphics were designed and created by myself.

Thanks for your attention
Massimo Sora

Take a more immersive Video Tour of my miniature on FaceBook!

The Final Model

The Vader X1 TIE Fighter is one I will always love to view… like this one from Massimo Sora.

Revell Darth Vader’s TIE Fighter easykit (06655) scale 1:56 length 165 mm

This model is easy to build, has 27 pieces and is built in a few minutes. The model has a glossy black colored support. The base color (blue) is the original plastic while some details are already painted. Darth Vader is painted well , and the cockpit is appreciable. The details of the model are very good and with a custom coloring can obtain good results. I repainted the cockpit recoloring details, I painted the details on the fuselage and on the solar panels with the technique of washing and dry brush. The model did not require a lot of work for color, with little you can get satisfactory results...

BEAUTIFUL!!! Nicely done Massimo!

This is an old MPC model built in 2008. There are 47 LED with 3 rechargeable batteries. I have customized the side-panel detail, lights, internal cockpit, gun, entry and landing gear with personal printed picture. There are no plastic/resin kit upgrades, only any small plastic or metal object (side panels)
Massimo

This model is very large, it is 435 mm long. I think it’s the most detailed model among the models Revell easykit and is very suitable to be customized. You need to use glue or model can be disassembled. I put an electronic circuit into the model for flickering engine leds with control trimmer. In the cockpit i have used fibers optic and auto-flashing leds. The auto-flashing leds are inexpensive and do not require electronic circuits, I used only the resistors for power supply to 12v. To enter the cockpit with the lights I had to cut some “internal bulkheads” of the fuselage and bend the optical fiber with hot air from a hair dryer...

Revell Obi-Wan’s Jedi Starfighter. Easykit (06679). Scale 1:30, length 198mm

This model is very simple to build, is composed of 39 pieces and is constructed in a few minutes. The model does not have the landing gear and is not provided with a support. The base color (brown) is the original plastic while some details and liveries are already painted. The pilot (Obi-Wan) is painted in a horrible way, while the cockpit is decent. The details of the model are quite good and with a custom color you can get good results. I repainted the cockpit, the effect is worn and aged, and other details with the technique of washing and dry brush. I left unchanged the original color of brown plastic The model does not require glue, but I recommend using it.
Massimo

Introducing the works of artist Massiom Sora!

Revell Tie Fighter easykit (06686). Scale is 1:57 or 1:65?… (Not specified the official scale) however the length is 156 mm

This model is easy to build, has 30 pieces and is built in a few minutes. The model has a glossy black colored support. The base color (blue) is the original plastic while some details are already painted. The pilot is painted well (everything is black), and the cockpit is appreciable. The details of the model are very good and with a custom coloring can obtain good results. I repainted the cockpit recoloring details, I painted the details on the fuselage and on the solar panels with the technique of washing and dry brush. I colored the plastic of the fuselage with the dry brush technique to give it a metallic effect...