KIT ALERT!! NEW from CRAGGS Models! Made to Order! -ALIENS- 1/18 (5 Feet Long!) DROPSHIP Kit

February 24, 2020 Posted in ALIEN Kits, ALIEN Selections, CRAGGS Models - Paul Anthony Craggs

KIT ALERT!

Presents

1/18 at 5 Feet in Length!

Colonial Marines DROPSHIP

(Pricing is Subject to Change by Kit Seller)

$3,850

Plus Shipping

Kit Scale: 1/18 (5 Feet Long!)

Kit: 3D Printed Parts made from Digital Files

Shipping: World-Wide

Kit Availability: MADE TO ORDER!!

Payment Methods Accepted: (Modeler Magic Always Recommends Using PAYPAL, eBay or MERCARI for BOTH Purchaser and Seller Protection.)

Kit Description: These are from 3D CGI models and then converted into STL files for printing. These are not resin molds or cast plastic there are 1st generation prototyping models taken from a 3d file and printed out .
3d printing :
The model I make are printed out on cr-10 printers with a primary layer height of 0.1000 mm this is fine detailed setting for large scale printing with in practical time frame (parts can take weeks to print out ) . With 3d printing they are no resin parts / no copy of a copy / no warping or sink hole issues, however Even at this quality you still have visible lines with this PLA plastic.
ABS is much finer but not stable and prone to warp and cracking during the process of printing and not good for production of large models like these.
This is basically a plastic model with a honey comb structure between the layers as its builds up; it can tolerate temp; to 150 degrees before any warping might occur.
It takes roughly 2 to 3.5 months to complete one model this includes the fine sanding and painting time; (this time frame is based on availability of the printers at the time of making your ordering it is first come bases ) I have currently 7 printers printing models 24 /7 and I am adding more printers all the time,

I offer most models in 3 different category’s Basic or Raw , finished kit or complete models
Please send Email to inquire about prices for BASIC & KITS

BASIC This is only for expert model makers who are familiar with 3D printed items and it requires clean up. As these filament plastic printers leave fine lines layers on everything you have to sand all the layers smooth with different grades of wet’n day paper very similar to car body work .
The model you see in the photos are after hours of sanding to make it completely smooth ‘ if you choose this category You will receive this model with all the flash or plastic support still attached! and you will have to assemble all the parts with superglue and baking power
No decals or stands are included in this package ONLY BASIC RAW KIT

MODEL KITS This is a completely sanded smooth and per primed model, like a model kit” parts ready to assemble.
This package does include a stand or base and decals with instruction (should this be required).

Complete models or Display models This is a complete model finished and painted with lighting (if lighting was shown ) with decals and stand as seen in the photos of the completed models that have been ordered .
Depending on the size of the model (some these models will be over 4feet long) Some; sub-assembly and slight touch up of paint at the joint areas may be required
As many of these are unique studio size models and large models they require extra protection .The built finished models will be shipped in wooden grates for total protection which will be included in the shipping costs
SHIPPING is done by getting a basic quote from the shipping company once the model is compete and packaged to get a total shipping price at which time payment would be made for shipping .
Payment
Payment process payment can be made with western union PayPal or bank transfer.
These are made to order models so payment must be made before any work is started.

Paul Anthony Craggs
Craggs Models 

To contact the SELLER direct, please click the CONTACT SELLER link below.

2012_NEW_MMM_BANNER_CONTACT_SELLER_BUTTON_290X50

To view EARLIER Updates of this Work In Progress, click the VIEW MORE Button Link below…

2012_NEW_MMM_BANNER_VIEW_MORE_HERE_BUTTON_290X50

2012_NEW_MMM_BANNER_CONTACT_ARTIST_BUTTON_290X50

Paul Anthony Craggs

Albany, Western AUSTRALIA

*****************************

*****************************

Statements made, or views expressed may NOT be the views of Modeler’s Miniatures & Magic

Pricing and Availability are subject to change by the Kit Maker/Vendor or Artist at any time. Modeler Magic is not responsible for maintaining the prices in accordance to the changes made by the Kit Maker/Vendor or Artist.

Professional Customer Service and Quality Control are the responsibility of the Kit Maker/Vendor or Artist selling the item of which Modeler Magic is only showing for them.

Modeler’s Miniatures and Magic has no professional or monetary affiliation with any kit makers, vendors or artists shown on this site other than showing the works and offerings those Artists, Kit Makers and Vendors wish to show on Modeler Magic in their own names. Modeler Magic promotes the art form in this way. Modeler’s Miniatures and Magic claims no trade marks or copyrights on anything shown on it’s site other than it’s own created artwork presented. Modeler Magic reserves the right to remove any material shown at any time from anyone, and we will follow all legal aspects of the art form as they are presented to us by the proven legal owners of the above stated materials and/or their court appointed representatives.

****************************************




Post break